Rough Top Bare Back Conveyor belt
Bare Back Conveyor Belting is a special conveyor belt.
1. Top cover, can be flat or impression
2. Fabric plies only
The Bare Back Belt provides thousands of flexible gripping fingers to hold packaged products or units being carriedup or down steep grades to a maximum of 35 degrees. Rough Top Conveyor Belt is available with black and tan rubber covers.
Bare Back Conveyor Belting is a special conveyor belt.
1. Top cover, can be flat or impression
2. Fabric plies only
Specifications
Conveyor Belt, Used for coal, ore, port, metallurgy, electric power and chemical etc.
Specifications:
| Standards | Cover Rubber | Adhesion | ||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
| DIN 22102 | Mpa | % | mm3 | N/mm (≤1.5mm) | N/mm (>1.5mm) | N/mm |
| DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | 5 |
| DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | 5 |
| DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | 5 |
| DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | 5 |
Cover Rubber:
| Standards | Cover Rubber | Adhesion | ||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
| AS 1332 | Mpa | % | mm3 | N/mm (≤1.9mm) | N/mm (>1.9mm) | N/mm |
| AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 |
| AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 |
| Standards | Cover Rubber | Adhesion | ||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
| RMA | Mpa | % | mm3 | N/mm (≤1.6mm) | N/mm (>1.6mm) | N/mm |
| RMA-I | 17 | 400 | 200 | 3 | 4.4 | 4 |
| RMA-II | 14 | 400 | 250 | 3 | 4.4 | 4 |
Packaging & Delivery
| Packaging Details: | 1. Water-proof P.P cloth + Steel strip. 2. Wooden box or Steel frame. 3. According to the customer’s requirement. |
| Delivery Detail: | 10-30 days |