The heat resistance conveyor belt is made of the multi ply and rubber cover canvas ‘polyester fabric’ covered with the high temperature or heat resistant rubbers, which are bonded through high temperature vulcanization, it is applicable to conveying of the coke, cement, clinker and hot casting etc.
WEIGH FEEDER BELT ENDLESS 1000 X 4600 MM ENDLESS WITH CONTROL FLAG TEMPRATURE 250 C DEG
1、The heat resistance conveyor belt’s specification shall be identical with that of the conventional conveyor belt.
2、The heat resistance conveyor belt shall be in accordance with HG2297-92.
3、The heat resistant conveyor belt contains three types.
Type I: It is able to resist the test temperature of no more than 100℃, the max. short-time operating temperature is 150℃，the symbol is T1.
Type II: It is able to resist the test temperature of no more than 125℃, the max. short-time operating temperature is 170℃，the symbol is T2.
Type III: It is able to resist the test temperature of no more than 150℃, the max. short-time operating temperature is 200℃，the symbol is T3.
Type IV: It is able to resist the test temperature of no more than 175℃, the max. short-time operating temperature is 230℃，the symbol is T4.
2、The heat resistance conveyor belt physical property of the cover rubber after heat test shall conform to the values specified in the table.