Rough Top Conveyor Belt Data Sheet
Rough Top rubber belt
Data Sheet
Construction:
2 or 3 ply construction with cut edges and carcass of EP fabric.
The surface texture resists the tendency for the material to roll back down the
conveyor.
Features:
1. The top cover is made of wear-resistant rubber with a non-slip surface. It has cushioning
effect, mollifies and absorbs vibrations and impacts given on transported materials and
simultaneously prevents slippings.
2. Available with bottom cover or bare back for slider bed applications.
3. Although it depends on the transported materials, transportation at inclination angles 25 ~ 30
is feasible.
Application:
Rough top conveyor belt is used for transporting light weight goods, such as sacks,
boxes and parcels, on inclined surface at angles of maximal 35 degree.
Specification:
Edge No. of ply Top cover Bottom cover
C/E 2 1/8″ (3.2 mm) 1/16″ (1.6 mm)
C/E 2 1/8″ (3.2 mm) Bare back
C/E 3 1/8″ (3.2 mm) 1/16″ (1.6 mm)
C/E 3 1/8″ (3.2 mm) Bare back